3/10/2024 0 Comments Flow meter vs regulator![]() This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. ![]() There are NO GASKETS or WASHERS to get the fittings to seal like other cheaper regulators sold that do not use the standard N-24 nut and NP-72 outlet. ![]() If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male portion. It comes with a standard 1/4" barbed fitting. The flowmeter outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. This does not fit straight CO2 cylinders. The inlet fitting is CGA580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The two main flow control devices are regulator flowmeters and flowgauge regulators. A flowmeter regulator controls gas flow from the outlet with a fixed outlet pressure and variable orifice. CGA580 connection for standard gas bottles from any supplier. A flowmeter regulator combines a pressure regulator and a flow meter (a device used to measure a fluids flow rate or quantity, such as gas, liquid, or steam). Backed by SPARC'S 2 year warranty against manufacturing defects. SPARC regulator / flow meter combos are great for MIG and TIG welding. Furick Adapter Kits for 17,18,26 Style Torchesįurick Hardware Kits for 9/20 Style TorchesĬK Worldwide Water Cooled Flex Loc (FL230)ĬK Worldwide Water Cooled Flex Loc (FL250)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |